Strong self-adhesive flashing tape with a natural lead-look finish comprising of an aluminium foil and a bitumen rubber adhesive.
The adhesive forms a strong waterproof seal by the simply pressing the tape into place by hand.
Application: Cut to the required length. Remove the backing.
Press Flashband into place using fingertip pressure.
Avoid excessive pressure. When laying adjacent rolls the Flashband must overlap by at least 25mm.
Use a seam roller or rounded piece of wood to smooth the Flashband and ensure good contact is made.
Surfaces must be sound, clean, dust free and fry.
Use bituminous Flashband Primer to improve adhesion on porous rough, dusty surfaces in cold or damp weather.
Porous surfaces-dampen lightly with water before applying.
Non-porous surfaces-should be dry or only very slightly damp.
Apply Flashband Primer with a water dampened brush.
Fill cracks wider than 3mm, deep hollows or depressions.
Size:10m long